Power button
1x short press
turn on/off the display
Press for 3-4 seconds
turn on/off the Smartwatch
Display
Short tap
open the selections or confirm a selection
Swipe to the right or the left
next or previous Menu page
Swipe from top to bottom
Short-cut function settings
Bluetooth connectivity and synchronization function
Turn on the Bluetooth on your Smartwatch:
Turn on your Smartwatch. Swipe several times from right to left over
the display until the Bluetooth icon appears. Tap the icon.
Activate Bluetooth on the mobile device
Now connect the mobile device with your Smartwatch „TG-SW1“.
Data Synchronization
After installing the FunRun App and successfully connecting the
telephone and Smartwatch via Bluetooth, you can synchronize data
between the Smartwatch and the mobile device (see chapter:
Install APP).
MicroSD card insertion
Format your MicroSD card in FAT32. Run your fingernail through
groove and take the back cover of your Smartwatch off. Push the
MicroSD card with the rounded corner facing forward into the
MicroSD card slot of your Smartwatch. In doing so, the golden
contact points of the MicroSD card point downwards.
