MP3 MODE
When FMT1100BT is on, plug in MicroSD Card, the FMT1100BT will enter the music play
mode and you hear voice say “MP3 Mode”. Under this mode rotate the Rotary Switch (2)
reverse / clockwise to go to the last / next track. Rotate and hold the Rotary Switch (2)
reverse / clockwise to decrease / increase the volume.
Long press the Rotary Switch (2) to switch among different modes: “all cycle” (all songs
will be repeated), “single cycle” (selected song will be repeated); “random-cycle” (songs will
be played randomly).
Click the Rotary Switch (2) twice to switch among 6 different EQ modes: EQ0-Normal,
EQ1-Rock, EQ2-Pop, EQ3-Classic, EQ4-Jazz, EQ5-Country.
You can press CH (6) to switch the frequency; long press "CH (6)" to switch to the next
mode.
Press the Rotary Switch (2) to pause the track. Press again the Rrotary Switch (2) to
continue the playback of the track.
When you remove the MicroSD card you hear “Bluetooth waiting for pairing”.
Bluetooth mode
(Connect the hands free system with a Smartphone)
For a successful Bluetooth connection between a mobile phone and the FMT1100BT,
first make sure that your Smartphone is Bluetooth capable.
Search with your mobile phone for Bluetooth enabled devices. Then choose the device
with the name
“FMT1100BT”
from the list. (When a password is required then use the
original password „
0000
“). Now the Bluetooth connection will start.
After a successful connection, you hear “Bluetooth connection successful”.
In case the Bluetooth connection fails, switch OFF the FMT1100BT and try again. After
switching to Bluetooth mode, Bluetooth works spontaneously, searching previous pairing
Bluetooth set. If the FMT1100BT fails to link, it starts pairing other Bluetooth devices. In this
case, turn on your Bluetooth device to search for the FMT1100BT. Car speaker music
streams by FMT1100BT after pairing successfully. When a call is incoming, you can
short/long press the Rotary Switch (2) to receive or reject it. After answering the call, short
press the Rotary Switch (2) to hang up, long press the Rotary Switch (2) to switch talking
between cell phone and device. Under this mode, you can press the CH (6) to switch the
frequency, long press CH (6) to switch to the next mode.
