TECNARE DPA 28X OWNER’S MANUAL
Tecnare Sound Systems –
www.tecnare.com
8
2.- Rotary thumb wheel CH-A: Controls the presets. To select the desire preset, press
the wheel.
3.- On / SIGNAL / CLIP led CH-A: When On indicate the unit is On, Signal at the input
and the input level is above the device´s maximum headroom respectively.
4.- LCD Screen CH-A: Show all the necessary information to control de unit
5.- Rotary thumb wheel CH-A: Allows you to switch between presets. To select the
desire preset, press the wheel.
6.- On / SIGNAL / CLIP led CH-A: When On indicates the unit is On, Signal at the input
and the input level is above the device´s maximum headroom respectively.
7, 8.- Ethernet connector: Standard RJ-45 female socket.
9.- Power switch: Controls power On/Off.
5 REAR PANEL FUNCTIONS
1.- Main Power: Connects via a standard IEC socket. A compatible power cord is
supplied with the unit. The voltage input is either 115VAC or 230VAC and is clearly
specified on the unit. Voltage requirement has to be stated upon ordering.
2, 3.- XLR input and outputs: Separate 3-pin XLR connectors are provided for each
audio input and output. The device's output stage employs the balanced impedance
topology. All I/O connectors have pin 1 as ground (shield), pin 2 as + and pin 3 as –
4.- USB connectos: USB connector per channel for PC connection.
1
2
3
4