Network Camera User’s Manual
Video record
Schedule mode
(1) “Every day”
Enable/Disable every day application.
(2) “Week day”
Enable/Disable week day application.
(3)“Selected day”
Enable/Disable selected day application.
Schedule information
(1)
Enter the
“Start time”
and
“Stop time”
for day mode.
Note that the time format is [hh:mm] and is expressed in 24-hour clock time. By
default, the start and end time of day mode are set to 01:00:00 and 23:59:59.
(2)“Sun”
/
“Mon”
/
“Tue”
/
“Wed”
/
“Thu”
/
“Fri”
/
“Sat”
Select the days of the
week to perform the application.
(3)
“
Start day
” and “
Start time
” as the start timing the time. “
End day
” and
“
End time
” as the end timing the time
(4) “Enable cyclic recording”
The cyclic recording function is enabled, during the
transaction stage when a storage space is full and the incoming streaming data is about
42/62
