104
Follow these steps to block a host from accessing the Internet:
(1) Ensure that either the system time is specified directly or SNTP is enabled.
(2) If the Parental Control page is not already displaying, click the Admin tab and
then click
Parental Control
in the menu bar.
(3) In the table on the Parental Control page, enter the IP address of the host you
want to block from accessing the Internet.
-- OR --
Select the host name (and corresponding MAC address) from the drop-down list.
Host names and MAC addresses will display in the list only when the hosts' IP addresses
are distributed from a DHCP server pool configured on the modem (and the host has, in fact,
been assigned a host name).
(1) Select the beginning and ending times for the block to be in effect for this host.
1. The time is specified in the format HH:MM:SS (hour, in military time,
followed by minute and second).
(2) Click
Add
. The new entry will display in the table.
If you have any troubles to configure or setup this ADSL Ethernet Router, please contact
us.
Before contacting us, make sure collect following information. Submit complete detailed
information of your problem will help us to provide you accurate answers.
Model
Name:
Serial
Number:
PC
Settings:
Other:
