N V
A
C
G DA OR
N
3 CONNECTING AND OPERATING
1. CURRENT: Verify the current requirement of the unit is compatible to your product.
2. POLARITY: Determine the polarity (+ or -) of the unit.
3. VOLTAGE: Set the required output voltage at the unit.
4. ADAPTOR PLUG: Select the fitting output plug.
5. OUTPUT PLUG: Plug it into the DC input jack of your device.
NOTE: The positive setting (negative ground) is the most common requirement.
6. PLUG IN: Plug in the adaptor to a 100-240 V AC mains socket.
7. IMPORTANT: If the unit does not operate properly, check the polarity setting immediately!
Remove the unit from mains when not in use.
4 WARRANTY AND RESPONSIBILITY
The producer grants a 2 years warranty to a new device.
The manufacturer is not liable for damages to persons or property caused by improper installation, operation or
maintenance.
Do not alter or modify the product or its accessories.
Any use other than described in this user`s manual is not permitted and causes loss of warranty, loss of guarantee,
and non-liability.
We reserve our right for misprints and changes of the device, packing, or user`s manual.
5 DISPOSAL INSTRUCTIONS
According to the European WEEE directive, electrical and electronic equipment must not be disposed
with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can pollute our environment.
You as a consumer are committed by law to dispose electrical and electronic devices to the producer, the dealer, or
public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol
on the product, in the user`s manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to environmental protection.
6 CE DECLARATION
This device corresponds to EU directive 2004/108/EC and 2006/95/EC.
7 SPECIFICATIONS
Model
IPW-NTS600G
IPW-NTS1000G
IPW-NTS1500G
IPW-NTS2250G
Input voltage (V AC)
100-240
Output voltage (V DC)
3/4.5/5/6/7.5/9/12
Output current (mA)
600
1000
1500
2250
max. output power (W)
7.2
12.0
18.0
27.0
Stand-by power (W)
0.16
0.2
0.3
0.3
Efficiency Average
~ 65%
DC plug size (mm)
2.5 / 3.5 / 3.5 x 1.35 / 5.0 x 2.1 / 5.5 x 1.5 / 5.5 x 2.5 / USB
4.0 x 1.7 e 5.5 x 2.1 only for model NTS1500G e 2250G
Summary of Contents for IPW-NTS600G
Page 8: ...ec y ...
