16
en
INSTALLATION AND CONNECTION
How to make a CAT5/5E/6 network cable
Follow the standard of IEEE-568B:
1 - White/orange
2 - Orange
3 - Green/white
4 - Blue
5 - Blue/white
6 - Green
7 - Brown/white
8 - Brown
CONNECTION DRAwINg
Matrix configuration
NOTE:
The switch has to support IGMP function
Point-to point configuration
IR USE gUIDE
IR passback
IR blaster extension cable should plug into the IR-out port of TX
(Transmitter) of this extender matrix, and the IR receiver extension
cable should plug into the IR-in port of the RX (Receiver) of this matrix
extender. The emitter of IR blaster should as close as possible to the
IR receiver window of the signal source device.
IR remote control
Using the IR remote controller to set/select the channel of this HDMI
Extender Matrix
hdbitt hdmi extender matrix
Summary of Contents for IDATA HDMI-MX383
Page 24: ...www techly com ...
