10
HDMI EXTENDER OVER NETWORK CABLE
EN
RJ45 to HDMI
LENGHT: Network cable length adjust button, allows selecting
between 12 levels to find the best setting based on the networking
cable type. 12 levels can be switched cyclically, and the level 1,
the lowest, is identificable by the lighted RED LED (which goes off
by going to the next level, turns on again when it passes back to
level 1).
This is a "LENGTH" button on the receiver end for adjusting
picture quality when connected with different length of cat6/6A/7
cable, the longer the cable, the higher level it should set (the more
signal you should manually give to it, by pushing the "LENGTH"
button). Supports memory function and needs no setting after
power off if the cable is not changed. If you change the cables you
need to set once again to adjust the picture.
RJ45 signal input
LED light: when red LED is light, it indicates the first level of
amplification. If you want to move to second level, press again the
button, for third level press twice and so on untill you reach the
correct adjustment. The ”LENGTH" button have to be pressed as
many times as you need to get the desired setting.
Connection status indicator led. lt lights on all the time with HDMI
signal transmission, flashes with no signal transmission.
DC5V power input
HDMI signal output
INSTALLATION PROCEDURES
How to make a Cat6 network cable?
Follow the stanard of EIA/TIA-568B
1-Orange/white
2-Orange
3-Green/White
4-Blue
5-Blue/white
6-Green
7-Brown/white
8-Brown
Summary of Contents for IDATA EXT-E70
Page 12: ...www techly com ...
