I-BELL-RING01
USER'S MANUAL
EN
Thank you for choosing Techly products.
Techly doorbell is an intelligent item different from the traditional
ones; both transmitter and receiver can be paired by users, simple
operation and convenient use.
Please follow the user manual on further installation and operation.
Specification
• Voltage range: 200-240V AC
• Voltage range (transmitter): 12V23A battery
• Wireless distance: 300 meter in open air
• Working frequency: 433.92MHz±200K
• Sound volume: 30-110 dB
• Power consumption: 0.5W
featureS
• Simplicity style, elegant and unique
• Low power consumption, power-saving mode
• Super long wireless transmission
• 52 optional stereophonic music tones
• 4 levels adjustable sound volume
packaGe contentS
• Transmitter *1
• Receiver *1
• Double-faced adhesive tape and 2 screws for wall mount
installation
inStallation method of tranSmitter
1. Open the package, take the receiver out and find out the
groove on the top of cover, use a flat blade screwdriver to
remove the cover. Install the 12V23A battery observing the
correct polarity, then close the cover.
2. There are two mounting options included for the installation
of the transmitter.
a. Stick the double-faced adhesive tape (included) on the
back of bell push; remove the other side of the tape,
press the bell push onto the wall, press hard for 30
seconds.
b. There are screws grooves in the back cover of the
receiver, the holes can be pushed through, and fixed to
the wall with screws.
3. When installation of transmitter is completed, plug the
receiver into a standard plug socket indoors.
function of receiVerS
learn code inStruction
1.
Sound volume selection:
short press volume button, the
sound volume will be increased to one more level. There are
totally 4 levels as a circle
2.
Music selection:
short press music button to play next music,
there are totally 52 melodies as a circle.
3.
Memory:
(1) Select favorite music from receiver first
(2) Keep pressing transmitter button (let LED be lighting
constantly)
(3) Long press volume button of receiver for 5 seconds
When receiver sounds “dong” with LED fast flash, pairing
program succeeds.
Remark:
Be sure to keep pressing transmitter button before (3) is finished
Program quits automatically after pairing operation is
completed. If the pairing does not succeed, then re-operate
again.
4.
Two or above transmitters choosing the same music
Select favorite music from receiver first
Then please follow point 3 (memory) to get new transmitter
paired one by one. The pairing program is available for a new
transmitter each time.
5.
All pairing memory clearance:
Press music button for 5
seconds to erase all pairing memory, when receiver sounds
“Dong” with LED flash that means setting succeeds, program is
back to default: it comes back to the 1st music, no transmitter
is paired with receiver.
WarninG
1. Use only high quality alkaline batteries. Poor quality
batteries will reduce the maximum wireless range.
2. The transmitter is not user serviceable; there is a danger of
electric shock if opened.
3. Avoid installing the receiver in direct sunlight, in an area of
excess rain/dripping.
troubleShootinG
The doorbell fails to sound:
• Ensure the maximum range has not been exceeded, (it will
be reduced within buildings).
• Check if both receiver and transmitter in pair
• Check the battery status. Whether it is reverse direction or
power failure.
• Avoid installation nearby metal and magnetic field, which
affects the transmission distance of signal.
Low sound volume:
• Check and adjust the volume control
With the CE sign, Techly
®
ensures that the product
is conformed to the basic European standards and
directives.
open
fix backing plate
insert battery
replace cover
press firmly
In compliance with EU Directive WEEE this product is marked with this
symbol. It means that used electrical and electronic products should not
be mixed with general household waste. There is a separate collections
system for these products in compliance with WEEE directive, otherwise
contaminative and hazardous substances can pollute the environment
LED Indicator
Sound
volume button
Music button
Plug
Speaker
