EN
10
En
InstaLLatIOn PrOCEdUrEs
How to make a Cat.5/6 network cable
Follow the standard EIA-568B:
1-Orange/white
2-Orange
3-Green/white
4-Blue
5-Blue/white
6-Green
7-Brown/white
8-Brown
COnnECtIOns
BI-dIrECtIOnaL Ir Pass BaCk
1) It support bi-directional IR pass back. User can control DVD at TX
end and control TV at RX end.
2) If control at RX end, please connect IR blaster extension cable
with IR OUT of TX and connect IR receiver extension cable with IR
IN of RX. If control at TX end, please connect IR receiver extension
cable with IR IN of TX and connect IR blaster extension cable with
IR OUT of RX.
Faq
q:
No image output?
a:
Check the led indicator status to make sure all connection are
good and stable
q:
Signal led “3” is flashing but no image output?
a:
Check if the HDMI display device has been switched to the right
HDMI input channel
q:
Signal led “2” is flashing but “3” light is off?
a:
Check whether the TX’s HDMI IN has signal input and make sure
RX’s HDMI OUT is well connected with HDMI display
q:
Output image has flashing points or disturbance points?
a:
Change TX’s HDMI signal input cable or use shorter HDMI cable
Extender HDMI HDBaseT
Summary of Contents for Cat.5E/6/7
Page 12: ...www techly com ...
