EN
7
HdMi ExtEndEr SplittEr ovEr cat6 witH ir
Dear Customer
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
iMportant SaFEtY inStrUction
intEndEd USE
We do not permit using the device in other ways like
described in this user’s manual. Use the product only
in dry interior rooms. Not attending to these
regulations and safety instruction might cause fatal
accidents, injuries, and damages to persons and property. The
manufacturer/supplier assumes no liability for damages caused by
failure to comply with the intended use.
To reduce risk of electric
shock, this product should
ONLY be opened by an
authorized technician when
service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product
to water or moisture.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• Your product is not a toy and is not meant for children, because it
contains small parts which can be swallowed and can injure when
used inappropriately!
• Please install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for example
by dropping or stumbling.
• Please remove the packing materials, because children may cut
themselves on them while playing. Furthermore, there is a risk of
swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which
might come into contact with water. Do not install the product close
to openings of air conditioners, or at places with an excessive
amount of dust or smoke. Keeps distance from flammable and
explosive devices
• Do not install the product at places subject to vibration, or
oscillation
• Do not modify and alter the product and any accessories! Do not
use any damaged parts.
• Keep enough space around all devices for a good ventilation and
free motion and to avoid damages.
• Do not plug-in/out the cables when it is in using.
• Use DC12V only for transmitter. Make sure the specification
matched if using 3rd party DC adapters.
HdMi Extender Splitter over cat6 with ir
Summary of Contents for 025572
Page 12: ...www techly com ...
