TL-FO2-HDC2 User Manual
www.tlnetworx.com | +1-608-960-7242
Preface
Read this user manual carefully before using this product. Pictures shown in this manual are for reference only; the
actual product may vary.
This manual is only for operation instruction only and not for any maintenance or repair.
Trademarks
Product model and logo are trademarked. Any other trademarks mentioned in this manual are acknowledged as the
properties of the trademark owner. No part of this publication may be copied or reproduced without prior written
consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. It has been tested and found to
comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own
expense will be required to take whatever measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate
the equipment.
SAFETY PRECAUTIONS
To insure proper operation, please read all instructions carefully before using the device. Save this manual
for further reference.
l
Unpack the equipment carefully and save the original box and packing material for possible future
shipment
l
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
l
Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
l
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
l
Refer all servicing to qualified service personnel.
l
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near
water.
l
Do not remove the housing of the device, as opening or removing housing may expose you to
dangerous voltage or other hazards.
l
Install the device in a place with adequate ventilation to avoid damage caused by overheating.
l
Keep the device away from liquids.
l
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or
liquid falls or spills on to the housing, unplug the device immediately.
l
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
l
Unplug the power cord when left unused for a long period of time.
l
If disposing of the unit, do not burn or mix with general household waste. The device must be
disposed of per local regulations for electronic recycling.