TL-IPFO User Manual
www.tlnetworx.com
1
Introduction
TL-IPFO series encoders and decoders provide the flexible, powerful, and scalable solution at
resolutions up to 4096x2160@60Hz, 3840x2160@60Hz (4:4:4) and 3840x2160@60Hz (4:2:0
10-bit HDR). They allow uncompressed UHD media to be switched and distributed over
standard 10GbE Ethernet networks. A local area network is covered with a range up to 984 ft
(300 m) over fiber optic cable with the included GBIC modules. Standard features like, bi-
directional RS232, bi-directional IR, and independent analog audio input/output are included.
TL-IPFO series encoders and decoders are the perfect solution for any zero-frame latency and
signal routing applications. Common applications include classrooms, conference rooms,
performing arts, and broadcasts.
Key Features
Transmitter
•
Encodes (transmits) audio & video to compatible decoders
•
Operates in point-to-point, point-to-many, many-to-point, many-to-many & video wall
modes
•
Transmits 18G HDMI over a 10G network switch
•
4K seamless switching
•
Doesn’t require a proprietary network switch
•
True IP switching – runs on a stand-alone network or on a standard data network
•
Deploys IGMP snooping and won’t slow down network data traffic
•
Fiber optic network connection with exchangeable 10GbE SFP+
•
HDMI & DisplayPort inputs with auto or manual switching
•
HDMI 2.0 compliant
•
HDCP 2.2 compliant
•
Supports maximum resolutions of 4K@60 4:4:4 & 4K@60 4:2:0 HDR
•
Implements minimal compression on signals over 10G
•
Zero frame latency
•
Seamless switching between sources
•
Bi-directional IR & RS232 pass-through
•
Ethernet pass-through (1G) for network and web-enabled device connectivity
•
Built-in video wall processing with bezel correction
•
Analog audio embedding or de-embedding
•
1,000 ft. (300m) max distance on multimode fiber-based networks
•
30km max distance on single mode fiber-based networks when exchanging the 10GbE
SFP+ module