Page 7
Nearby metal surfaces may cause a decrease in reading distance and speed. This is caused
by the combined effects of parasitic capacitance and conductance.
4.5 Mounting and removal the module
First fasten the base directly to the wall using two relevant fasteners, see
Pic. 3
. Then set
the housing on the upper part of the base and rotate the housing until the both parts snaps
down.
It is recommended to place an installation box for connection of incoming cables on the other
side of the wall or in highly secured area (with in/out readers).
Pic. 3: Mounting of the reader module
Release the clamps using the enclosed key before dismounting the housing, see Pic. 4.
Pic. 4: Removal of the reader module
