Techfaith Wireless Technology Flying Angel, User Manual, Page: 11 / 110

Flying Angel 3G Wireless Data Card
User Manual
11
inserted into your PC. It shows the working status of the Flying Angel:
Indicator Light State Working Status
Off The device has no power. The Flying Angel is not
completely inserted into the USB slot or the computer is in
standby mode (which powers down the modem).
Blinking Green The device has detected a GPRS/EDGE (2G) wireless
network, and is ready to connect.
Green
The device has connected with a GPRS/EDGE (2G)
wireless network, and is sending or receiving data.
Blinking Blue
The device has detected a 3G wireless network
(WCDMA/HSUPA), and is ready to connect.
Blue
The device has connected with a 3G wireless network
(WCDMA/HSUPA), and is sending or receiving data.
Red
Warning : a SIM card has not been installed in the Flying
Angel, or the SIM card is not properly seated in the SIM card
slot.
Follow the instructions in Chapter 2 to make sure your
SIM card is properly installed.
1.4.2
Before using the Flying Angel 3G Wireless Data Card
Before you can use the Flying Angel 3G Wireless Data Card for the first time you must: