How should the SDs be correctly assembled?
!
Fire smoke must be able to reach your smoke detector unhindered.
Please observe this especially when making structural alterations
and installations in your apartment. If somehow possible, the SDs
must be located at least 60 cm away from all items. In case of ceil-
ing-high furniture, each section of the room should be equipped
with a smoke detector.
If changing the room use
(e.g. a living room becomes a bedroom),
the existing SD installation must be
checked
with regard to adhe-
rence to the regulations and adapted as necessary.
This is also valid if sound propagation is hindered, e.g. through large
room partitions or noise-dampening materials.
If it becomes necessary to install the smoke detector somewhere else,
please contact your landlord or your property management represen-
tative.
The smoke detectors should only be installed by a specialist. The service
technician will stipulate the installation location in accordance with
the valid regulations. Please neither disassemble nor move the smoke
detector of your own accord.
Techem radio frequency smoke detector 2 – operating instructions
31