MONTAGEANLEITUNG
Mounting instructions
1. Mounting
1.1
You will find the control relay (double relay) at the relay carrier 1 in the footwell
left on slot 14 and 15. (above the paneling)
1.2
Exchange the soft-top-control-unit-module at the relay plate. Test the
TECHART
soft-top-control-unit –double relay for tight fix.
1.3
Function test:
1
stagnant:
Release handbrake, press rocker switch non-stop until the top has
reached its final position (open or closed)
2. driving between 3-50km/h:
Press rocker switch for about 1sec. The top will
open or close automatically until its final position.
1.4
Stick the additional
TECHART
-Information-sheet into the drivers manual
(„Convertible top“).
Note:
Keep the original soft-top-control-unit-module within your vehicle at all
times (see
TECHART
-Information-sheet “operation and emergency use”).
3/3
