manualshive.com logo in svg

Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND, Installation And Reference Manual, Page: 15 / 64

Share
Download
Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND Installation And Reference Manual Download Page 15

3-1 

Chapter 3 

 

SOFTWARE INSTALLATION FOR 

I-CLASS CARDS 

 

3.1 Overview

 

 
This installation chapter describes how to install and configure 
the drivers for I-Class Raptor cards.  The I-Class Raptor cards 
that are currently supported with this software are the Raptor 
2000 and Raptor 2500.  Installation of T-Class Raptor cards is 
covered in Chapter 4. 
 

3.2 Requirements 

 
The following are prerequisites for installing the Raptor Drivers 
for Linux Software: 
 

• 

At least 2MB of disk space available in 

/ 

(root directory)

 

and 

/usr

 for drivers. 

• 

A Raptor card is presently installed in the workstation/server 
(See Chapter 2 for instructions on installing a Raptor 
graphics card). 

• 

Linux kernel v2.2.x or v2.4.x installed 

• 

XFree86 (v4.0 or later) installed and configured for the 
current console graphics card 

• 

RPM (v3.0 or later) packaging tools for installing the 
package 

 
The device driver and the DDX module for Linux and XFree86 
are loadable.  No kernel changes or X server rebuilds are 
required. 

Summary of Contents for RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND

































































Reviews:

No comments