Raptor Drivers for HP-UX Installation and Reference Manual
3-6
(Replace
/dev/dsk/c1t2d0
with your device file from step 3.)
5. Verify that you can read the CD-ROM.
# ls /CD-ROM
6. Initiate "
swinstall
" and specify your mount point as the
source depot.
# swinstall -s /CD-ROM
7. Move the cursor down to the desired package and highlight it by
pressing
<space>
.
8. Press
<tab>
to activate the menu bar. Move the cursor across
to 'Actions' and press
<Enter>
. Move the cursor down to
'Install (analysis)' and press
<Enter>
.
9. Follow the on-screen instructions to complete installation. If any
warnings or errors are reported, check the Log file (default:
/var/adm/sw/swagent.log
), correct the errors, then
continue.
3.3 New Devices
One new device name is created in the
/dev
directory for each
Raptor card. It is denoted by
raptor#
for the Raptor 2000 card,
where
#
represents an instance number assigned by the operating
system. The device names for the other products are enumerated
below:
Raptor 2100T
rap2kt#
Raptor 2500T-DL
raptfp#
Raptor 1100T
raplkt#
If the Raptor card was not present in the system during software
Summary of Contents for RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND
Page 35: ...NOTES...
Page 36: ...Publication 65 0229 01...
