Tech Source RAPTOR 1100T - X11R6.1 FOR AIX, Installation Manual

Page: 13 / 40

3-1
Chapter 3
SOFTWARE INSTALLATION
3.1 Requirements
The following are prerequisites for installing Raptor X11R6.1 for AIX
Software:
•
The system is running AIX 4.3.3, AIX 5.1, AIX 5.2
•
Any previous version of TSI software has already been
uninstalled. (Please refer to the manual that accompanied that
software for the appropriate uninstall procedure).
•
41MB of disk space is available in
/usr.
One or more of the cards listed in Section 1.1 is presently installed
in the workstation.
3.2 CD-ROM Installation
Installation of Raptor software can be done through SMIT. The
following are the step-by-step instructions for installing Raptor
X11R6.1 for AIX software from CD-ROM:
1.
Install a Raptor card in the computer as described in
Chapter 2.
2. Login
as
root
on the target install machine.
3.
Uninstall any previous version of TSI software in
accordance with the instructions supplied with that
software.
The installation may fail if previous TSI software already
exists on the system.