- 50 -
Previous Programme
• Press "
P<P
" (Previous Programme) button
to select the last selected programme. This
button provides swapping between last two
selected programmes. For example, select
programme 8, then select programme 2.
Now, if you press "
P<P
" button, programme
8 will be selected. If you press the same
button again, programme 2 will be selected
and so on.
Active window switch
In PIP and PAP modes “ ” and “ ” buttons
are used to select active window. “
” and
“ ” cursors are used to show the mute sta-
tus osd of the active window.
OK
Programme Swap (SWAP)
This button is used to swap between the
programmes in the PIP window and main
picture if the screen layout is selected as
PIP
.
PC screen is not displayed in PIP window.
Freeze Picture
You can freeze the picture on the screen by
pressing “
OK
” button. Display layout should
be selected as
full screen
for this feature. At
split screen
and
PIP
layouts; this function is
invalid.
Sound Indicator
The alternatives of the indicator are
Mono,
Stereo, Dual A and
Dual B
. This indicator is
displayed under the programme number in-
dicator on the screen. "
I-II
" button is used to
select
Mono, Stereo, Dual A
or
Dual B
.
MONO
In
Mono
broadcast or in forced-mono (for
stereo broadcast).
STEREO
In
Stereo
broadcast.
DUAL A
If dual broadcast detected.
Dual A
is se-
lected in default and also can be selected
after
Dual B
by Remote Control.
DUAL B
If
Dual B
selected by Remote Control.
Mute Indicator
It is placed in the upper left side of the
screen when enabled.
To cancel mute, there are two alternatives,
the first one is pressing " " button, thus the
volume is set to the preceding value, and the
second one is increasing/decreasing the
volume level, thus it starts from the previous
level to increase/decrease.
TV
I II
SOURCE
02-ENG-32700-1546 UK-32 INCH TFT-(AU-V4G5)(10 PAGE)(HD-READY)(NEW)-50081920.p65
11.05.2006, 16:05
50
