1.7
Installation Instructions for
MonoPoint 4" Round, Surface, & Rectangular Canopy
700KC_
1
920KLCNPY
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent
dimmer.
Minimum volume of the electrical box must be 6 cubic
inches (98 cubic centimeter).
KABLE LITE MONOPOINT CANOPIES
Shaping the Hard Wires
Bend the hard wires to desired shape with hands.
Resizing the Hard Wires
If necessary cut the hard wires and the clear insulators to
the desired length with a sharp cutter.
Cut 1/4" of the clear insulators on the hard wire, where
the fixture is going to be connected, with a sharp knife.
NOTE:
To avoid electrical shorts, do not remove the
clear insulator.
INSULATOR
HARD WIRE
1
1A
1
2A
1
2
1
2
