Tech Lighting 700KLMRT30E Series Installation Instructions Download Page 4

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

© 2014 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.

A Generation Brands Company

SAVE THESE INSTRUCTIONS!

4

Summary of Contents for 700KLMRT30E Series

Page 1: ...ing the lighting system in any way The fixtures used with the system must be identified for used with the corresponding system Minimum volume of the electrical box must be 6 cubic inches 98 cubic centimeter Load the circuit of the remote transformers to no more than the maximum rated capacity as specified To reset the electronic surface transformer turn the power off then on main power breaker pan...

Page 2: ...ormer wire to the hot power line wire with a wire nut Place all wires and wire nut connections inside the electrical box 5 3 7 6 Connect the Transformer Wires Directly to Kable Lite Cables INSULATED KABLE LITE CABLE KNIFE When using insulated Kable Lite cables remove of the insulation from each cable where the power feed connector is going to be mounted with a sharp knife Make sure not to cut or n...

Page 3: ...ne for each turnbuckle into the turnbuckle hole Tighten the M4 set screw with the 2MM Allen wrench Connect the Transformer Wires to Universal Turnbuckles Connect the Transformer Wires to Slimline Turnbuckles Remove the power feed connector by loosening the 6 32 set screw with 1 16 Allen wrench refer to 2B Feed the uninsulated portion of the power feed wire one for each turnbuckle into the turnbuck...

Page 4: ...Tech Lighting L L C All rights reserved The Tech Lighting graphic is a registered trademark of Tech Lighting L L C Tech Lighting reserves the right to change specifications for product improvements without notification A Generation Brands Company SAVE THESE INSTRUCTIONS 4 ...

Reviews: