Tech.Inc TI52, Instruction Manual, Page: 9 / 17

5
Ge tti ng Started
To get setup and using your TI52 Bluetooth speaker please follow the
quick two step guide below;.
Step One:
Your TI52 will be supplied with some charge, so you can start using it
straight away. Carefully remove from the box and POWER ON the
speaker by pressing
bu tt on. The Bluetooth bu tt on will begin
to fl ash BLUE. The blue indica ti ng represents the speaker is searching
for an external device.
Step Two:
To pair a Bluetooth connec ti on with the TI52 speaker you must have
a Bluetooth enabled device to connect and stream music from such
as a smart phone. Using your selected external device follow the
correct steps to open and search Bluetooth devices in range. Find,
Select and Connect to your speaker which will be labelled in your
search as
TI52 . Once a connec ti on has been established the
Bluetooth bu tt on will beep and turn constant BLUE . Your audio
data from your connect device can now be wirelessly streamed and
synchronised with the TI52 Bluetooth speaker.
Please note: If the Bluetooth connec ti on is stable when speaker is
turned o ff , the speaker will automa tic ally connect to the last
connected device.
Alterna ti ve AUX connec ti on: If you wish to make a direct audio
connec ti on please use the 3.5mm cable supplied to connect your
external device to the TI52 Bluetooth speaker.
For more detailed instruc ti ons please refer to General opera ti ons on
the follow pages.