User's manual
6
IV.
Configuring the module
Installing the module with a controller
In the case of cooperation with the ST-26402 strip, the installation and operation process is intuitive.
After a correct connection of the module, the Internet module should be enabled in the strip's fitter's
menu
(Menu >> Fitter's Menu >> Internet module >> Registration) –
a registration code will be
generated and it should be entered on the website.
CAUTION
The generated code is valid only for 60 minutes. If the registration on the website does not
take place within that time, a new code should be generated.
CAUTION
We recommend using Mozilla Firefox or Google Chrome web browsers.
IV.a) Logging in on the website
After the code in the controller has been generated, the user should visit the website
http://oeg.emodul.eu. First, the user's account should be created:
Registration panel for a new account at oeg.emodul.eu.
