Tech Controllers ST-292, User Manual

Page: 15 / 28

ST-292 User’s manual
15
Parameters icons:
Time settings Weekly control settings
Day from… Floor sensor
Night from… Comfort temperature
Optimum start / heating-
cooling mode selection (in
service menu)
Economical temperature
Enter service menu / zone
selection (ST-292v4)
Hysteresis
Channel selection Temperature sensor calibration
VII.c) Controller functions
The user navigates the menu structure using , , EXIT and MENU. In order to edit particular
parameters, press MENU. Next, press MENU to view the controller functions – the edited
parameter is flashing whereas the remaining parameters are not displayed. Use
or to
change the parameter settings. Press MENU to confirm the changes and move on to edit the next
parameter or press EXIT to confirm the changes and return to the main screen view.
V.c.1) Block diagram – main menu
M
ain
m
enu
Day of the week
Time settings
Day from...
Night from...
Optimum start
Service menu
Heating / cooling mode
Channel selection (ST-292 v2, ST-292 v4)
Zone selection (ST-292v4) Weekly control
Floor sensor
Maximum floor temperature*
Floor sensor hysteresis*
Minimum floor temperature*
Pre-set comfort temperature
Pre-set economical temperature
Hysteresis
Temperature sensor calibration