13
1.
BLOCK DIAGRAM - ZONES MENU
2.
ON
After the room sensor has been activated and registered in a given zone, it is used by EU-L-8e controller. <OFF> is the default
setting for this option. It may be activated when the room sensor has been registered.
3.
SCHEDULE SETTINGS
3.1.
LOCAL SCHEDULE
This weekly schedule is assigned to a given zone only. After the room sensor has been detected by the main controller, the
schedule is activated automatically in this zone and may be adjusted by the user to individual needs. The changes introduced
apply only to the given zone.
Zones
1
-8
ON
Schedule settings
Local schedule
Global schedule 1-5
Actuators
Information
Settings
Minimum opening
Maksimum opening
Sigma
Protection profile
Control range
Window sensor
ON
Delay time
Information
Floor heating
Operation mode
Minimum temperature
Maximum temperature
Temperature settings
Comfort temperature
Economical
Holiday
Hysteresis
Calibration
Zone name
Zone icon
Summary of Contents for EU-M-8N
Page 1: ...1 EU M 8N ...
Page 7: ...7 The diagrams below illustrate correct connection ...
Page 19: ...19 ...
Page 20: ...20 ...
