Tech Controllers EU-292 v2, User Manual

Page: 23 / 28

EU-292 User’s manual
23
In order to set the floor temperature hysteresis,
press menu until hysteresis panel appears on the
screen (floor sensor must be activated beforehand
by selecting ON)
Use
or to select desired hysteresis value.
Press MENU to confirm and move on to edit the
next parameter or press MENU to confirm and
return to the main screen view.
VII.c.12) Minimum floor temperature
Minimum floor temperature concerns the
underfloor heating system operation. After this
value has been reached by the floor sensor, contact
opening and closing depends only on the current
room temperature. Below this value the contact
remains closed regardless of other factors.
Press MENU until the minimum floor temperature
panel appears on the screen (it is necessary to
activate the floor sensor beforehand by selecting
ON) Use
or to select desired temperature
value.
Press MENU to confirm and move on to edit the
next parameter or press MENU to confirm and
return to the main screen view.
VII.c.13) Pre-set comfort temperature
Pre-set comfort temperature is used in weekly
control mode and day/night mode. Press MENU
button until the comfort temperature change panel
appears on the screen.
Press
or to set the desired temperature.
Press MENU to confirm and move on to the next
parameter or press EXIT to confirm and return to
the main screen view.
VII.c.14) Pre-set economical temperature
Pre-set economical temperature is used in weekly
control mode and day/night mode. Press MENU
button until the economical temperature change
panel appears on the screen.
Press
or to set the desired temperature.
Press MENU to confirm and move on to the next
parameter or press EXIT to confirm and return to the
main screen view.