XLR Output Level Switch
Sets the range of the signal level of the SansAmp XLR Output jack. In the 0dB position
(engaged), the Output is in the line level range. When in the -20dB position (disengaged),
the Output is in the instrument level range. Note: The standard output level range of the
SansAmp RBI is 0dB due to the popularity of digital recorders, which are unforgiving to
excessive input levels. This prevents overloading the input of a digital recorder.
Uneffected XLR Output
Provides a buffered balanced output of the direct bass signal without processing.
Footswitch
Any alternating (on/off) footswitch will activate the unit. Connect the footswitch output
to Footswitch In. To toggle between this unit and another SansAmp RBI (or SansAmp
RPM), do the same as above and connect the SansAmp RBI Footswitch Out to the
Footswitch In of the second SansAmp RBI (or SansAmp RPM). Now you can switch
between 2 sounds. For the audio signal path, connect your bass into the Input of the
first SansAmp RBI. Connect the 1/4” SansAmp Out to the Input of the second unit. The
1/4” Output of the second SansAmp RBI is then your main audio out. (Refer to the
Hook-up Diagrams on Page 13.)
OPTIONS:
BASS POWER ENGINE 60:
Designed to be used with
any
direct recording device or
pre-amp, analog or digital, tube or solid state, in stomp
box or rackmount formats, from
any
manufacturer.
•
60 watts of transparent power
•
8 Ohms / 100 watts handling
•
12” custom-designed speaker
•
Chrome-plated steel grill
•
3-band active EQ controls
•
Dimensions: 18.25”w x 18.75”h x 14.25”d
•
Weight: 36 lbs.
B410 SPEAKER CABINET
(for use with a power amp)
•
8 Ohms / 400 watts handling
•
Four cast frame, custom-
designed 10” speakers
•
Chrome-plated steel grill
•
Rear vented
•
Speakon® connectors
• 1/4” connectors
•
Dimensions: 24”w x 24”h x 16”d
•
Weight: 70 lbs.
B115 SPEAKER CABINET
(for use with a power amp)
•
8 Ohms / 300 watts handling
•
Custom-designed 15” Eminence®
Neodymium speaker
•
Chrome-plated steel grill
•
Rear vented
•
Speakon® connectors
• 1/4” connectors
•
Dimensions: 24”w x 24”h x 16”d
•
Weight: 48.1 lbs.
POWER ENGINE 300 and POWER ENGINE 400
Instrument Power Amplifiers
• 300-watt/4-Ohm mono and 400-watt/8-Ohm stereo
• Uncolored, unaltered tone
• Oversized power supply with toroidal transformer that is lighter in weight and
reduces stray magnetic fields that cause interference and hum
• Top-quality Toshiba power transistors
• Heat-sensor equipped cooling fan
• Unit Dimensions: 17”w x 3.5”h x 10”d / Overall: 19”w x 3.8125”h x 11.5”d
• Weight: Power Engine 300 @ 22.3 lbs; Power Engine 400 @ 26.25 lbs
8
7
