OPTIONAL 4
X
10 SPEAKER CABINET
(Model #B410)
•
8 / 400 watts handling
•
Four cast frame, custom-
designed 10” speakers
•
Chrome-plated steel grill
•
Rear vented
•
Speakon® connectors
•
1/4” connectors
•
Dimensions: 24”w x 24”h x 16”d
•
Weight: 70 lbs.
OPTIONAL TRIPLE-FUNCTION FOOTSWITCH
(Model #BFSW)
The Footswitch further expands the
Landmark 600’s capabilities:
•CHANNEL
remotely switches between
the two channels.
•MIX
engages both channels simultane-
ously, giving you three footswitchable
sound options.
•MUTE
allows you to silently tune your
guitar or change instruments.
Corresponding LED indicators let you know the status of each switch. The
Footswitch is powered via the cable, so no batteries are required. And, unlike most
amps which require a custom multi-pin connector, this Footswitch is engineered to
utilize
any
standard 1/4” instrument or speaker cable. You can easily replace the
cable should you lose it, or purchase different cable lengths to suit your particular
needs.
Footswitch (Model #BFSW) measures 3.5” x 4.5” x 1.5” and is available through your
local authorized dealer or directly through Tech 21.
LANDMARK 600 SPECIFICATIONS
Note:
With on-going product development and improvements, specifications and/or
the cosmetic appearance of this unit may change without prior notice.
Replacement parts
are available, i.e., knobs, logo plate, handles, etc. For more
information, please contact your authorized dealer or Tech 21, Inc.
Model Number:
LM600
Input Impedance:
1M
Nominal Input Level:
-20dBm
Optimal Output Load:
4
Power Output:
600 watts RMS @ 4 (minimum load)
400 watts RMS @ 8
Maximum Power Consumption:
approx. 1KVA
Forced-air cooled
AC Input Power:
100V, 117V, 230V, 240V
NOTE: AC power cannot be switched.
See authorized dealer/distributor for voltage
modification information.
Cycles:
50/60 Hz
Dimensions:
17”w x 5.25”h x 16”d / Overall depth: 17.75”
Weight:
40 lbs.
Optional Accessories:
• Rack ears
*
• 4’ Speakon® cables
• 5’ Speakon® cables
• Triple-function Footswitch (Model #BFSW)
• 4x10 Speaker Cabinet (Model #B410) and
corresponding optional black vinyl cover with
white logo (Model #VC-B410)
*
Instructions for rackmounting:
1. Unplug unit. Remove top cover. Install rack ears with provided hardware. Replace
top cover.
2. Considering its weight, we recommend mounting unit on bottom of rack case.
3. If there isn’t enough clearance at the bottom of the rack case, detach the rubber
feet simply by removing the screws.
4. If there’s too much clearance (with or without the rubber feet) and you have a gap,
provide additional support to the rear of the unit (such as larger feet, wooden shims,
etc.).
®Registered trademarks.
MIX
MUTE
CH 1
CH 2
CHANNEL
8
9
