Flushing technology
6-21
Bare wall – mounting and installation
1
230
V
~
The U 2 flush valve housing can be installed in dry-walls
and brick-walls. The transformer is already integrated into
the flush valve housing to facilitate coordination of the
different trades carrying out the assembly work. Therefore,
the transformer can be directly connected with a 230 V
cable.
2
3
It is also possible to loop the connection through (fig. 3).
4
R 1/2 "
!
To connect the pipe, hold the connection housing as
shown in fig. 4.
Installing the wall-mounted TECEfilo urinal
flush plate 230 V/12 V
1
Cut the thin surface with a cutter knife.
2
Use a saw to cut the corner areas, where the wall is thicker,
flush to the wall.