Tecamp Raptor Top Manual Download Page 2

Important Safety InStructIonS

The apparatus shall not be exposed to dripping or splashing and that 

no objects with liquids, such as vases, shall be placed on the appara-

tus. The MAINS plug is used as the disconnect device, the disconnect 

device shall remain readily operable.

Warning: the user shall not place this apparatus in the area during 

the operation so that the mains switch can be easily accessible.

1.  Read these instructions before operating this apparatus.

2.  Keep these instructions for future reference.

3.  Heed all warnings to ensure safe operation.

4.  Follow all instructions provided in this document.

5.  Do not use this apparatus near water or in locations where con-

densation may occur.

6.  Clean only with dry cloth. Do not use aerosol or liquid cleaners. 

Unplug this apparatus before cleaning.

7.  Do not block any of the ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than 

the other. A grounding type plug has two blades and a third 

grounding prong. The wide blade or the third prong is provided 

for your safety. If the provided plug does not into your outlet, 

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particu-

larly at plug, convenience receptacles, and the point where they 

exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified 

by the manufacturer, or sold with the apparatus. When a cart is 

used, use caution when moving the cart/apparatus combination 

to avoid injury from tipover.

13. When a cart is used, use caution when moving the cart/appara-

tus combination to avoid injury from tipover.

14. Unplug this apparatus during lighting storms or when unused for 

long periods of time.

15. Refer all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such 

as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has 

been dropped.

cautIon:

 Use of controls or adjustments or performance of proce-

dures other than those may result in hazardous radiation exposure.

WARNING: To reduce the risk of FIRE or electric shock, do

not expose this apparatus to rain or moisture.

cautIon:

 RISK OF ELECTRIC SHOCK DO NOT OPEN

cautIon:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE 

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol, within an 

equilateral triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” within 

the product’ s enclosure that may be of suficient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

!

Summary of Contents for Raptor Top













Reviews: