BOARD even guitar cables can make nasty noises. Take
good care that the board stands firmly on the ground.
When you drive the board with a lot of power without
anyone standing on it you are likely to hear rattling noi-
ses due to the lack of pressure on the board and hence
insufficient floor adhesion.
1. Edge strip
The surrounding aluminium edge strip protects the PLEA-
SURE BOARD against damages. The bright metal con-
trasts with the black housing of the PLEASURE BOARD
and – in most cases – the dark stage floor thus making
it more visible even at dim light. This will prevent the
PLEASURE BOARD from becoming a pitfall.
>> TecAmp Pleasure Board
at least one of the feet. On its way to the amp the cable
should be fixed on the ground with a cable crossover, a
rubber mat or gaffer tape.
Come on Board
The PLEASURE BOARD is a subwoofer system with a
vibrating platform thus conveying the low frequencies to
the body of the musician. The heart of the road-rugged
construction consists of eight LFA (Low Frequency Ass-
Kick) transducers with a capacity of 600 watts @ 8 ohms.
The PLEASURE BOARD can be driven by the specially
developed PLEASURE PUMP. This setup gives you a
system which works on its own and fits every occasion.
Of course you can power PLEASURE BOARD with a regu-
lar bass amp, either as a stand-alone subwoofer or as an
addition to your existing speaker cabinet.
For a hassle-free performance don’t place any objects on
the board. Due to the vibrations of the PLEASURE
5
2. Handle
Use the recessed bar handle on the bottom for conven-
iently carrying your PLEASURE BOARD.
3. Connector
You will find the connectors in the recessed bar handle
on the bottom of the PLEASURE BOARD. Connect the
PLEASURE BOARD to your amp using a high quality
speaker cable with NL2FC Speakon
®
connectors. Con-
nect the cable while holding the PLEASURE BOARD
upwards before you put it down.
Care should be taken that the cable does not get trapped
beneath one of the five rubber feet on the bottom. See
to relieve strain from the cable by making a loop around
4
1
2
3
