Step 4
Press the ‘RESET’ until the desired number of
decimal places are displayed, then press and
hold the ‘TOTAL’ button to save and enter
the ‘Auto Reset’ screen shown.
Press the ‘RESET’ until the desired choice
for auto resetting after the display is turned
off is displayed, then press and hold the
‘TOTAL’ button to save and enter the
‘Flow Direction’ screen is shown in Step 6.
Step 3
Press the ‘RESET’ until the desired unit of
measure is displayed, then press and hold
the ‘TOTAL’ button to save and enter the
‘Decimal Places’ screen shown in Step 4.
Step 3
Step 4
Calibration
Instruction Guide
