TEC TECDrive TEC -3-120070-101 Series, User Manual

Page: 16 / 29

TECDrive TEC-3 User Guide Revision 1.20
16
www.tecmotors.co.uk/tecdrive
5
O
p
e
ra
ti
o
n
5. Operation
5.1. Managing the Keypad
The drive is configured and its operation monitored via the keypad and display.
NAVIGATE
Used to display real-time information, to access and exit
parameter edit mode and to store parameter changes
UP
Used to increase speed in real-time mode or to increase
parameter values in parameter edit mode
DOWN
Used to decrease speed in real-time mode or to decrease
parameter values in parameter edit mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
START
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi-directional keypad
mode is enabled
5.2. Operating Displays 5.3. Changing Parameters 5.4. Read Only Parameter
Access 5.5. Resetting Parameters


Drive Stopped
/ Disabled


Press and hold
the Navigate
key > 2
seconds


Press and hold
the Navigate
key > 2
seconds

To reset
parameter
values to their
factory default
settings, press
and hold Up,
Down and Stop
buttons for > 2
seconds.
The display will
show “

”

.


Drive is
enabled /
running,
display shows
the output
frequency (Hz)


Use the up and
down keys to
select the
required
parameter


Use the up and
down keys to
select P-00

.


Press the
Navigate key
for < 1 second.
The display
will show the
motor current
(Amps)


Press the
Navigate key
for < 1 second


Press the
Navigate key
for < 1 second

Press the Stop
key.
The display will
show “

”

.


Press the
Navigate key
for < 1 second.
The display
will show the
motor power
(kW)


Adjust the
value using the
Up and Down
keys


Use the up and
down keys to
select the
required Read
Only
parameter


If P-10 > 0,
pressing the
Navigate key
for < 1 second
will display the
motor speed
(RPM)


Press for < 1
second to
return to the
parameter
menu


Press the
Navigate key
for < 1 second
to display the
value 5.6. Resetting a Fault

Press the Stop
key.
The display will
show “

”


Press for > 2
seconds to
return to the
operating
display


Press and hold
the Navigate
key > 2
seconds to
return to the
operating
display
