Receiver/Amp (Line) Output:
Use a RCA cable to connect the output of the TC-754 to the input of your main
amplifier. This input could be labeled: Line In, Input, Aux, Tuner, etc.
Alternatively to an amplifier input you can use a mixer console or a computer sound
card. For this purpose you will need a suitable cable.
When connecting you must not mix up the channels: The right channel is normally
signalized red.
Power:
Plug the transformer pack into either a wall outlet of the appropriate power rating or
into an outlet of the main amplifier.
To switch on the TC-754 press the Power button.
When turned on the front panel LED will glow red, otherwise green.
Note: When power is interrupted to the TC-754, you must turn it on again. So, if you
do not want to do this, either plug the transformer pack into a wall outlet and not into
an switching outlet of the main amplifier.
Operation:
Turn on the TC-754 as described above.
Select the sound source you wish to listen to by pressing the corresponding button on
the TC-754.
Adjust the volume by rotating the volume control.
Note: The TC-754 will remember the last source you selected as long as the main
power to the transformer pack is not interrupted.
(If power is interrupted when the transformer pack is plugged into a switching outlet
on the main amplifier, the TC-754 will switch back to the Phono input.)