TEC SL-9000-FFR-CA Owner'S Manual Download

Page: 23 / 96

REMOVAL AND REPLACEMENT OF MEDIA

9. REMOVAL AND REPLACEMENT OF MEDIA

9- 2

4. Insert the tip of the receipt/label into the print head.
5. Align the two media guides with the right edge of the receipt/label.

6. Thread the receipt/label as shown below.

When using a label roll, take up the backing paper onto the winding roll and fix it with the backing

paper stopper.

NOTE:

Labels and receipts should be left-aligned as viewed from the front of the machine, and
always threaded in parallel with the media shaft and the print head. Failure to do this may
cause a paper jam or a skew feed.

7. Turn the head-up lever to the arrow indicating direction to set the print head in position.

(Lebel threading method) (Receipt threading method)

8. Close the printer cover.
9. Finally press the Feed key to confirm that the labels/receipts are loaded correctly.

Media Guide

Print Head

Head-up Lever

Label

Winding Roll

Receipt

Head-up Lever

Backing Paper Stopper

Summary of Contents for SL-9000-FFR-CA

































































































Search results

Summary of Contents for SL-9000-FFR-CA

Reviews:

Related manuals for SL-9000-FFR-CA

Brands by name

Popular brands

TEC SL-9000-FFR-CA, Owner'S Manual

Search results

Summary of Contents for SL-9000-FFR-CA

Reviews:

Related manuals for SL-9000-FFR-CA

Brands by name

Popular brands