3. DIAGNOSTIC TEST OPERATION
EO18-11006A
3.11 Thermal Print Test
3-11
3.11 Thermal Print Test
(1) Contents
This test checks the status of the thermal printer which is installed into the ECR. If an error is detected, the
corresponding error No. is displayed on the 7-segment display. Generally the test is performed after the
printer is replaced.
(2) Operation
Mode
Lock:
BLIND
Key
Operation:
80
[X]
(or
[@/FOR]
) 17
[AT/TL]
(3) Print
format
(4) Display
•
7-segment display
When an error was detected, the error No. is displayed.
Error Name
Error No.
Head temperature error (Receipt printer)
1
Head temperature error (Journal printer)
2
Head voltage error (both of Receipt and Journal printers)
3
Receipt cover open error
4
Journal head open error
5
Receipt end error
6
Journal end error
7
(When the error in the above table was not detected, the corresponding Error No. is blank on the display.)
(5) Quit
The test ends by pressing the
[ITEM CORR]
key.
NOTES:
1.
The test should be performed when the printer is in normal condition.
2.
When the Error No. 1 to No. 3 are displayed, first power off the ECR and replace the printer or the Main PC
board.
10-10-2003 FRI #0
P80
DIAG 17
0012 15:48TM
Store Name Logo
1 2 3 4 5 6 7 8
Error No. (See the table below.)
