Sayfa
13
/
21
not block the entrance of the pellet to fire pot and start your appliance
normally. In this mode it will start with pellet as to wood catch the fire then
auger stops pellet feding and your appliance runs on wood. If the flame starts
to decrease add some wood. Do not keep the door open more than 20
seconds, otherwise it will go in extiguishing phase.
Work Thermostat Setting
Click button
P3
or
P4
: the display
D3
blinks
With other click of the buttons
P3 / P4
the value of the thermostat is
increased or decreased
After 3 seconds the new value is memorised and the display shows as normal
Manual Pellet Loading
