- 20 -
EN
Comfort insert
up to max. 13 kg
Baby insert
(under comfort insert)
up to max. 9 kg
The comfort insert and baby insert
Removal of the belt system
•
Loosen the belt system so that the shoulder belt bracket can be seen on the reverse side of
the child car seat. (Fig. 1)
•
Pull the shoulder belts out of their metal brackets on the reverse side of the child car seat and
guide these through the child car seat to the front side. (Fig. 2)
•
Remove the shoulder pads, the belt tongues and the belt lock pad.
•
To remove the seat belt buckle, you must turn the metal clip of the seat belt buckle crosswise
and push it through the opening on the seat bucket. (Fig. 3)
•
Fold the shoulder belts together so that these can be stored in the hollow on the back rest
behind the seat cover. (Fig. 4)
•
Ensure that you retain all the parts that are removed in a safe place.
Isofix connectors
•
Insert the yellow insertion aids through the slit in
the cushion between the backrest and seat and
into the Isofix holders.
•
When doing this, the flat side must be facing
downward. This step is not necessary if the vehicle
already has firmly installed insertion aids.
•
Press the buttons on the Isofix connectors on both
sides to extend these.
•
Slide the Isofix connectors into the insertion aids
and press them in until you hear these lock in
place.
•
The indicators on both sides only show green
when the connections are in place. Press the child
car seat against the backrest until it is securely in
position.
Support leg
•
Fold out the support leg underneath the child car
seat.
•
Press the button to adjust the height of the support
leg and ensure that this is fully in contact with the
footwell of your vehicle.
•
Ensure that the indicator on the support leg is
showing green.
