1. If the pump does not operate when the solar panel is in full sunlight, follow instructions below:
a. If the connection to the solar unit is compromised: Check the connection and reattach.
b. If the rotor is blocked: Clean the pump (see above for instructions) and remove any debris
from the rotor with a small brush or stream of water.
2. The pump is operating, but there is no water running through the fountain:
a. Check the tubes or pump for sediment or scale build-up. Clean with water or a small
brush (if applicable)
Pump
: If the pump starts to lose power or stops working, check for the build-up of sediment,
scale, or dirt in the pump. Remove the pump filter, the gland, and the rotor. Clean them with
a stream of fresh water and a small brush if needed to remove the debris.
Solar Panel
: The panel should be cleaned periodically with a soft tissue to maintain optimum
conversion of sunlight into solar power.