Team HAM MobileCom 1011, Manual

Page: 25 / 42

MENU CHANNEL SETTINGS
1. To open the menu channel settings, first, press the key
【
MENU
】
(5) shortly (the symbol F
(1) will appear) and then, press the channel selector
【
PUSH
】
(14).
2. Make your selection by turning the rotary channel selector (14).
3. Press the channel selector
【
PUSH
】
(14) to access the available settings.
4. Now, make your selection by turning the rotary channel selector (14) and confirm your
selection by pressing the channel selector
【
PUSH
】
(14).
5. To exit the menu, press the key
【
MENU
】
(5) or any other key.
No. Function LCD Symbol settings and description
1 BUSY transmission blockage on occupied channels; ON/OFF
2 REP direction of TX REP frequency shift
OFF
: no shift
REP+ : shift to top
REP- : shift to bottom
8 SCAN SC edit scan list; symbol SC (14)
ADD / DEL
4 Public Data PD general settings; ON / OFF; activates / deactivates
Menu Channel settings in active state, these functions
are not available: HICUT, NB, ECHO, 10KHZ and
ROGER
5 HI-CUT HIC receiving tone type; ON / OFF
6 NB NB Noise Blanker; ON / OFF
7 ECHO ECHO Echo; ON / OFF
8 10KHz 10k frequency shift +10 kHz; ON / OFF
9 ROGER RB Roger Beep; 1-8, OFF
MENU PUBLIC DATA
1. Press and hold the key
【
PUSH
】
(14) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key
【
PUSH
】
(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key
【
PUSH
】
(14).
6. Press any key to exit the menu.
No. Function LCD Symbol settings and description
1 Hi-cut HIC receipt tone type; ON / OFF
2 NB NB Noise Blanker; ON / OFF
3 Echo ECHO Echo; ON / OFF
4 10kHz 10k frequency shift +10 kHz; ON / OFF
5 Roger RB Roger Beep; 1-8, OFF
25
HAM_MobileCom-1011_final_17-7-14:Layout 1 7/22/2014 10:21 AM Seite 25