Team Tech Offroad TACOMA HOOD STRUT Kit Installation Download Page 2

Page: 2 / 2

THANK YOU

for choosing

Team Tech Offroad

Questions?

Please contact us!

[email protected] • STechSwitch.com • 720-307-7263

The upper Ball Stud Bracket mounts here.

Measure 16” from the end of the hood hinge, the bottom of the

Ball Stud Bracket mounts here. Place the outside (back) edge of

the Ball Stud Bracket 1 ¾” from the edge of the hood. Mark the

hole locations with a marker. Drill 2 (1/8”) holes.

Attach strut.

Side 2 completed. Installation completed.

Mount the Ball Stud Bracket and tighten the Tec screws.

You are now ready to attach the strut.

You are

finished with

side 1. Repeat

instructions for

side 2.

Summary of Contents for TACOMA HOOD STRUT

Page 1: ...eld you may need to remove sealant from the top of the fender so bracket sits level 1 With the Ball Stud Bracket against the weld mark hole location with a marker Drill 2 1 8 holes 2 Mount the Ball St...

Page 2: ...the bottom of the Ball Stud Bracket mounts here Place the outside back edge of the Ball Stud Bracket 1 from the edge of the hood Mark the hole locations with a marker Drill 2 1 8 holes 6 Attach strut...