Team Orion VortexR8X Pro, Instruction Manual

Page: 13 / 70

www.teamorion.com 13
forward to reverse immediately without any pause. Do
not use this mode with other car types as it can overload
and/or damage the ESC.
2. Drag Brake Force
Sets the amount of brake automatically applied when the
throttle is returned to the neutral position. This simulates
the engine breaking effect of a real car. Warning! Stronger
brakes will also result in higher ESC and motor running
temperature. Check the motor and ESC temperature and
adjust the parameter to keep temperature within safe limits.
› Setting value from 0% to 100% or custom setting
(default 0%)
3. Low Voltage Cut-off
This function helps to prevent battery over-discharge. The
ESC continuously monitors the battery’s voltage. If the
voltage becomes lower than the threshold for 2 seconds,
the output power is shut off and the red LED flashes twice
repeatedly. The cutoff threshold calculation is based on LiPo
individual cell voltage. For NiMH batteries, if the voltage
battery pack is higher than 9.0V, it will be considered as
a 3 cell LiPo battery pack; if it is lower than 9.0V, it will be
considered as a 2 cell LiPo battery pack. Using the optional
Digital Program box you can adjust custom values for the
cutoff threshold. Unlike the preset values, custom cutoff
values are for the total battery voltage not individual cell
voltage.
› Setting value from OFF to 3.4V/cell or custom value for
whole battery voltage (default 3.2V/cell)