Installing the Y Cable
1.
First, connect the printer end of the cable to the laminator port on the back of the printer (Fig 4).
Fig 4
2.
Next, connect the first and second laminator as shown in Fig 5.
Fig 5
3.
Once you connected both units to the cable, the completed configuration should look exactly like the picture in
Fig 6. Plug in the power cords for the laminators and the printer. You may now power up the printer. The
printer will automatically detect both units and will add the second unit in the user mode as “Heat Roller 2” for
configuration purposes.
Fig 6
