Thank you for choosing the Team Magic E6 TROOPER II. The E6 TROOPER II is designed to be fun to drive and usestop quality parts for
performance and durability. Before you start building your new R/C kit, we suggest you read though the instruction manual first. Be sure
to check all assembly and performance tips before you start. We hope you enjoy the building processes.
General Building Tips:
Read the instruction manual before building.
Clear a work area and try to work on a light color towel to avoid missing dropped parts.
Don't over-tighten fasteners. Many assembly problems are caused by over-tightening screws or nuts. Don't use too large a grip. Please go slowly and
feel the resistance build. Just snug it up.
When it doesn't fit, please double check. If an assembly is not going together correctly, then either there really is a bad fit (e.g. a part is damaged or
defective) or a mistake in assembly. Always re-read the instructions when there are any problems. If you cannot figure out what's wrong, always ask
dealer, distributor or Team Magic. Don't use force beyond what the instructions call for.
Using the right tools makes assembly much easier. The instructions below finely indicate you what tools to get to make things easier. We don't want to
scare you by saying that all these tools are required, but you will have a easier time if you have them. Borrow them from a friend to check if necessary.
The assembly is arranged so that you will open the bag and finish that bag before you go on to the next bag. Sometimes, you will have parts
remaining at the end of a bag. These will become part of the following bags.
A Good Dealer Is Extremely Important!!
A good hobby dealer can help you with most assembly problems you might encounter. This is the main reason why you should buy your kits from a
good dealer rather than from the cheapest dealer. Bring your problematic parts to the dealer and, most likely, you'll walk away soon thereafter with
the problem solved. If you think that you really don't have the mechanical skills to complete the assembly, you may pay your dealer to finish the job for
you.
!
Thank you for purchasing the E6 TROOPER II. To drive the car, you will need to check the following procedures.
1
1
Included tools
Cross Wrench
(17mm)
(Please always buy these items in model shops)
AA Alkaline Or Rechargeable
Batteries For Transmitter, 4pcs
Helpful equipments
3
Hobby Knife
(Warning!! This knife cuts
nylon parts and fingers with
equal ease. Be careful.)
TM Black HC Nut Driver
5.5mm (for 3mm nut)
#117010
TM Black HC Hex Wrench
Metric Size 3.0mm
#117002-4M
Needlenose Pliers
TM Black HC Hex Wrench
Metric Size 2.5mm
#117002-3M
Body Scissors
(for body cutting)
#116006
TM Black HC Hex Wrench
Metric Size 1.5mm
#117002-1M
TM Black HC Hex Wrench
Metric Size 2.0mm
#117002-2M
Required items
2
7.4v Rechargeable
Battery Pack X 2
Battery Pack charger
MONSTER TRUCK TROOPER II
2
E6 TROOPER II EP MONSTER TRUCK
Binding (connecting the receiver to transmitter)
Turn the steering wheel right to turn the front tires go
right.
Turn the steering wheel left to turn the front tires go left.
Press the throttle trigger to moving forward the vehicle
Push forward the throttle trigger to brake and reverse the vehicle.
