LOSB9515 Xcelorin Electronic Speed Control v1.1 Page 15
• After turning on the vehicle, the Blue LED will be on for normal operation.
• If reverse is active then you will notice the Yellow LED is also on.
Confirmation of Full Throttle and Brake
• While the ESC is on and operational, if you pull the throttle trigger to Full
Throttle the Green LED will turn ON solid.
• Push the throttle trigger to Full Brake, the red LED will turn ON solid.
Note: If the transmitters brake endpoint adjustment is reduced after
calibration then the Red LED will not turn on.
ESC – reverse operation
Should you get into a situation that requires reverse, after you have applied
any brakes you may have needed, return the throttle trigger to the neutral
position. Wait a moment or two and then push the trigger forward for reverse.
Note: There is automatic protection within the Xcelorin ESC. Only after
you have stopped and returned the trigger to neutral will reverse
become available. If while traveling in reverse, pull the trigger to go
forward. This is to help prevent serious damage to the drive train.
