Page 2
Operations Check
Throttle
Steering
Throttle/Brake
Linkage
Turn on the transmitter and check for proper voltage (fig. 4A).
Slide the switch on the side of the radio box to the "ON" position.
With the front tires off of the ground (fig. 4B), turn the steering
wheel on the transmitter from left to right. The wheels should turn
smoothly and with ease. Also operate the throttle and brake
(fig. 4C), checking for quick, smooth operation. Do not try to
operate your truck if any of the servos or any part of the radio is not
operating correctly. If the servos operate slowly, the batteries are low
and must be replaced (if using alkaline batteries) or recharged. Never
try to operate your model if either the transmitter or receiver batteries
are low.
6A
After filling the fuel bottle with fuel, lift the lid of the fuel tank and fill the tank (fig. 5A). Make sure you put the lid back on both
the fuel bottle and the jug of fuel. Press down on the primer button several times (fig.5B) until you see the fuel move through
the fuel line to the carburetor. Do not pump the primer after the fuel reaches the carburetor or you will flood the engine and
make it difficult to start.
Fueling
4A
4C
4B
5A
5B
