background image

Page 4

Losi Li-Po Battery Pack
Warning!

Lithium Polymer (Li-Po) batteries are significantly more volatile than other rechargeable batteries used in RC 

applications. Failure to read and follow these instructions and safety precautions 

may result in fire, personal injury 

and damage to property

. Losi, Horizon Hobby, Inc., its retailers, and any other representatives, assume absolutely 

no liability for use of this product or failure to comply with these instructions and precautions. 

If you are not prepared to accept complete liability for the purchase and/or use of this product, you are 

advised to return it new and unused to the place of purchase immediately.
Never ship batteries without the expressed permission of the recipient. Batteries carrying 25% or more charge 

cannot be shipped safely. Batteries which are damaged cannot be shipped safely. Damage or loss due to 

unsafe shipping is the legal responsibility of the person who shipped the product.

CAUTION: This product may ignite under certain conditions. 

Please read all safety precautions before use.

Please call 877-504-0233 with any questions or concerns regarding this product or warranty.

Usage Guidelines, Warnings and Safety Precautions 

•  Li-Po batteries may explode if damaged or if disposed of improperly.
•  Always inspect batteries before charging.

• 

Never

 charge or use a Li-Po battery or pack that shows any damage or disfigurement of any kind. Swelling is a 

sign of internal damage. Any breach of protective cover, wiring or plugs is also reason to discontinue use (See 

Disposal Instructions). 

• 

Use specific Lithium Polymer charger only. Do not use a Ni-Cd or Ni-MH charger 

– failure to do so may 

cause a fire, which may result in personal injury and/or property damage.

• 

Never

 charge around or in the area of any flammable or combustible materials.

• 

Always

 charge Li-Po batteries in or on fire resistant materials or containers.

• 

Never

 leave battery and charger unattended while in use. 

Improper charging or discharging of Li-Po batteries 

could result in fire.

• 

Constantly monitor

 the temperature of the battery pack while charging. If the battery becomes hot to the touch 

discontinue charging immediately. Disconnect the battery from the charger and observe it in a safe place for at 

least 15 minutes.

•  If at any time you see a battery starting to balloon or swell up, discontinue charging or using immediately. 
• 

Lithium batteries can still ignite after at least 45 minutes

 due to a delayed chemical reaction. If battery is 

damaged or overheats, observe the battery in a safe area outside of any building or vehicle and away from 

combustible material.

•  Do not allow children to charge Li-Po battery packs.
•  Do not allow children to use Li-Po batteries without adult supervision.

• 

Shorting the wire leads can cause fire.

 If you accidentally short the wires, the battery must be placed in a safe 

area for observation for at least 15 minutes.

•  Never store or charge a battery pack where the temperature will go below 32 degrees Fahrenheit or above 

130 degrees Fahrenheit. Extreme temperatures will damage the battery pack and may cause a fire. Battery 

performance may be diminished by less extreme temperatures.

•  Any of the following may cause the battery to be damaged resulting in battery swelling, leaking, or fire:
•  Bending, Folding or Dropping of battery
•  Damaging the edge seal of the battery
•  Taking apart the battery
•  Mixing cells of differing chemistry, or types, or sizes
•  Mixing cells of different ages

Summary of Contents for Mini-Monster Baja















Reviews: