background image

 

14 

WArrAnty insPection And rePAirs

To receive warranty service, you must include your 

original sales receipt verifying the proof-of-purchase 

date. Provided warranty conditions have been met, 

your Product will be repaired or replaced free of charge. 

Repair or replacement decisions are at the sole discretion 

of Horizon Hobby.

non-WArrAnty rePAirs

Should your repair not be covered by warranty the 

repair will be completed and payment will be required 

without notification or estimate of the expense unless 

the expense exceeds 50% of the retail purchase cost. 

By submitting the item for repair you are agreeing 

to payment of the repair without notification. Repair 

estimates are available upon request. You must include 

this request with your repair. Non-warranty repair 

estimates will be billed a minimum of 1/2 hour of labor. 

In addition you will be billed for return freight. Please 

advise us of your preferred method of payment. Horizon 

accepts money orders and cashiers checks, as well 

as Visa, MasterCard, American Express, and Discover 

cards. If you choose to pay by credit card, please include 

your credit card number and expiration date. Any repair 

left unpaid or unclaimed after 90 days will be considered 

abandoned and will be disposed of accordingly. Please 

note: non-warranty repair is only available on electronics 

and model engines.

United States:

Electronics and engines requiring inspection or repair 

should be shipped to the following address:

Horizon Service Center 

4105 Fieldstone Road 

Champaign, Illinois 61822 

USA

All other Products requiring warranty inspection or repair 

should be shipped to the following address:

Horizon Product Support 

4105 Fieldstone Road 

Champaign, Illinois 61822 

USA

Please call 877-504-0233 or e-mail us at 

[email protected] with any questions or 

concerns regarding this product or warranty.

United Kingdom:

Electronics and engines requiring inspection or repair 

should be shipped to the following address:

Horizon Hobby UK 

Units 1-4 Ployters Rd 

Staple Tye 

Harlow, Essex 

CM18 7NS 

United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@

horizonhobby.co.uk with any questions or concerns 

regarding this product or warranty.

Germany:

Electronics and engines requiring inspection or repair 

should be shipped to the following address:

Horizon Technischer Service 

Hamburger Strasse 10 

25335 Elmshorn 

Germany

Please call +49 4121 46199 66 or e-mail us at service@

horizonhobby.de with any questions or concerns 

regarding this product or warranty.

fcc informAtion

This device complies with part 15 of the FCC rules. 

Operation is subject to the following two conditions: (1) 

This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation.

Caution: Changes or modifications not expressly 

approved by the party responsible for compliance could 

void the user’s authority to operate the equipment. 

This product contains a radio transmitter with wireless 

technology which has been tested and found to be 

compliant with the applicable regulations governing 

a radio transmitter in the 2.400GHz to 2.4835GHz 

frequency range.

Compliance Information for the  

European Union

instructions for disPosAL of Weee by users 
in the euroPeAn union

This product must not be disposed of with other waste. 

Instead, it is the user’s responsibility to dispose of their 

waste equipment by handing it over to a designated 

collection point for the recycling of waste electrical 

and electronic equipment. The separate collection and 

recycling of your waste equipment at the time of disposal 

will help to conserve natural resources and ensure that it 

is recycled in a manner that protects human health and 

the environment. For more information about where you 

can drop off your waste equipment for recycling, please 

contact your local city office, your household waste 

disposal service or where you purchased the product.

 

Summary of Contents for Mini HIGHroller





















Reviews: